San Diego Auto Repair

Stop! It's one of those things your vehicle has to do consistently and reliably.  That's why brake maintenance is vitally important, worthwhile for you to make sure stays up to date. A brake system has many components. If your vehicle has disc brakes, they have pads that make contact with the rotors (the metal discs).  Those pads usually have a metal back, and the part that presses against the discs is made of a material which provides friction to stop the vehicle. Because of that friction, the pads are expected to wear down and eventually the rotors will, too.  But the pads usually are the part that will need to be replaced more often. But how do you know when it's time? There are several signs, one of which is when your brakes squeak or make a high-pitched sound when you step on the brake pedal.  Many newer vehicles also have sensors on the brake pads.  When the pads get worn down to a certain point, the sensor will tell the vehicle's computer to turn on a li ... read more

If you hit a bump in the road and your vehicle just keeps bouncing up and down for a lot longer time than it used to, you may have bad struts and shocks.  They're the things that help to keep your vehicle's wheels and tires planted to the road surface. But they don't last forever.  With care and depending on where and how you drive, shocks and struts should be replaced at intervals ranging from 50,000 miles/80,000 km to 100,000 miles/160,000 km.  If you drive on bumpy roads with a lot of potholes, that interval will likely be shorter. Rough surfaces can take their toll. But how do you know if your shocks and struts are doing their job properly? The best way is to have your vehicle checked by a technician.  He or she can inspect the shock absorbers and struts for leaks, corrosion and damage.  Mounts and bushings can also go bad and they should be evaluated as well.  A thorough examination by a technician will also include looking at other suspension parts ... read more

If your vehicle creaks and squeaks when you drive down the road, it may mean that some of the metal parts are rubbing against each other and need to be lubricated.  Those could be parts of the suspension, steering system and the drivetrain.  Years ago, most vehicles had to have their chassis (what you think of as the frame) regularly lubricated.  Newer vehicles are made with what some call "lifetime lubrication," but there are still parts of the chassis that need to be maintained with lubricants.  Your service advisor can help you know when that needs to be done. In your owner's manual, the vehicle's manufacturer lists components that need regular maintenance. Things like u-joints, steering joints, sway bars, bushings and joints in the suspension. Some of them may have that "lifetime lubrication," while others may not. When you bring your vehicle in for service, a technician will look for any parts that have grease fittings.  They will inspect these components ... read more

When you push on your brake pedal, you should find your vehicle easy to stop.  But at some point, you might notice stopping takes much more pressure on the pedal than it used to.  When it gets to that point it becomes a safety issue, and you should bring your vehicle in so we can track down what’s not working correctly. Brake pedals that are stiff mean there’s something wrong with one or more components of your entire brake system.  For example, it could be moisture has contaminated your brake fluid, making it harder to push the pedal down. Many vehicles use hydraulics to amplify your pedal pressure to a force strong enough to stop your vehicle.  Certain problems can develop with your hydraulics, such as a faulty master cylinder, a kink in one of your brake lines, or a failed proportioning valve which regulates pressure to your rear brakes. Vacuum leaks can also make your brake pedal hard to push. Another cause could be a problem with your vehicle&rsquo ... read more

If you’ve ever driven a bicycle with hand brakes, you’ll probably understand how the brake pads on your vehicle work.  Bicycle brakes use a system that squeezes the bike wheel’s rim with a pair of cushioned pads activated by your hand squeezing the hand brakes on your handlebars. The friction of those pads stops the wheel. That’s the same principle used for the wheels on your vehicle.  Step on the brake pedal and that causes pads to put pressure on discs in the wheels called rotors.  Those pads create friction and stop the wheels from turning. Brake pads in vehicles are made from several different materials.  The pads most commonly used are ceramic or a combination of metals. The friction that stops your vehicle generates heat and wears both the pads and, eventually, the rotors, too.  That means that, over time, both are going to need replacing to work properly.  One sign brake wear is getting noticeable may be  when you hear s ... read more

When you head out to your vehicle after it's been parked and notice oil leaking underneath it, that's something to have looked at right away.  Oil leaks mean your oil level is probably low and running a vehicle in that condition can lead to expensive repairs. While there are many reasons oil leaks develop, one possibility is a bad valve cover gasket.  Vehicle engines have a cover bolted over the spot where the engine valves are, and that cover keeps the oil inside the engine. In between the cover and the engine is a gasket that keeps that seal tight.  But after many years of high engine temperatures and vibrations, that gasket or the bolts that hold on the valve cover can fail or loosen, and oil can leak. You may see dirty oil on the valve cover in the engine compartment, near the spark plugs, or around the bolts that hold the valve cover on.  All those are signs of leakage and time to bring your vehicle in for our technicians to check out. In some vehicles, taking ... read more

Of the things you think about most, your tires are probably pretty far down the list. That’s understandable because today’s tires are engineered to do their job without needing you to pay too much attention to them. But they DO wear out, and worn tires can contribute to skidding in bad weather, not being able to stop, a ride full of uncomfortable vibrations and, even a sudden blowout. Yikes. Let’s figure out right now how to know if your tires need replacing! Let’s face it. Most of us don’t know the first thing about tires. So, the best way to make sure what shape yours are in is to take your vehicle to a qualified service facility to have the tires checked out by a trained technician.  Here are things they’ll check: Tread.  Tread is the part of the tire that touches the road surface.  Different tires have different tread patterns and something called tread blocks - the raised rubber parts that contact the road. The longer a tire has ... read more